Active Standards

Disclaimer

The European Space Agency hereby disclaims any liability for use of these electronic documents and assumes no responsibility for any error or omission therein.

By downloading ECSS Standards from this site, you agree to the terms and conditions of the ECSS License Agreement / Disclaimer.

 

Downloads & useful links

 

Please use the online ECSS Change Request form, that is available on every page of an active ECSS document, to give feedback on the standards.


Active ECSS Standards

  1. ECSS-E-AS-11C – Adoption Notice of ISO 16290, Space systems – Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment (1 October 2014)
  2. ECSS-E-AS-50-21C Rev.1 – Adoption Notice of CCSDS 131.0-B-4, TM Synchronization and Channel Coding (13 January 2023)
  3. ECSS-E-AS-50-22C Rev.1 – Adoption Notice of CCSDS 132.0-B-3, TM Space Data Link Protocol (13 January 2023)
  4. ECSS-E-AS-50-23C Rev.1 – Adoption Notice of CCSDS 732.0-B-4, AOS Space Data Link Protocol (13 January 2023)
  5. ECSS-E-AS-50-24C Rev.1 – Adoption Notice of CCSDS 231.0-B-4, TC Synchronization and Channel Coding (13 January 2023)
  6. ECSS-E-AS-50-25C Rev.1 – Adoption Notice of CCSDS 232.0-B-4, TC Space Data Link Protocol (13 January 2023)
  7. ECSS-E-AS-50-26C – Adoption Notice of CCSDS 232.1-B-2, Communications Operation Procedure-1 (1 March 2021)
  8. ECSS-E-ST-10-02C Rev.1 – Verification (1 February 2018)
  9. ECSS-E-ST-10-03C Rev.1 – Testing (31 May 2022)
  10. ECSS-E-ST-10-04C Rev.1 – Space environment (15 June 2020)
  11. ECSS-E-ST-10-06C – Technical requirements specification (6 March 2009)
  12. ECSS-E-ST-10-09C – Reference coordinate system (31 July 2008)
  13. ECSS-E-ST-10-11C – Human factors engineering (31 July 2008)
  14. ECSS-E-ST-10-12C – Methods for the calculation of radiation received and its effects, and a policy for design margins (15 November 2008) +Corr.1 (22Feb2017)
  15. ECSS-E-ST-10-24C – Interface management (1 June 2015)
  16. ECSS-E-ST-10C Rev.1 – System engineering general requirements (15 February 2017)
  17. ECSS-E-ST-20-01C – Multipactor design and test (15 June 2020)
  18. ECSS-E-ST-20-06C Rev.1 – Spacecraft charging (15 May 2019)
  19. ECSS-E-ST-20-07C Rev.2 – Electromagnetic compatibility (3 January 2022)
  20. ECSS-E-ST-20-08C Rev.2 – Photovoltaic assemblies and components (20 April 2023)
  21. ECSS-E-ST-20-20C – Electrical design and interface requirements for power supply (15 April 2016)
  22. ECSS-E-ST-20-21C – Electrical design and interface requirements for actuators (15 May 2019)
  23. ECSS-E-ST-20-40C – ASIC, FPGA and IP Core engineering (11 October 2023)
  24. ECSS-E-ST-20C Rev.2 – Electrical and electronic (8 April 2022)
  25. ECSS-E-ST-31-02C Rev.1 – Two-phase heat transport equipment (15 March 2017)
  26. ECSS-E-ST-31-04C – Exchange of thermal analysis data (1 February 2018)
  27. ECSS-E-ST-31C – Thermal control (15 November 2008)
  28. ECSS-E-ST-32-01C Rev.2 – Fracture control (30 July 2021)
  29. ECSS-E-ST-32-02C Rev.1 – Structural design and verification of pressurized hardware (15 November 2008)
  30. ECSS-E-ST-32-03C – Structural finite element models (31 July 2008)
  31. ECSS-E-ST-32-08C Rev.1 – Space engineering – Materials (15 October 2014)
  32. ECSS-E-ST-32-10C Rev.2 Corr.1 – Structural factors of safety for spaceflight hardware (1 August 2019)
  33. ECSS-E-ST-32-11C – Modal survey assessment (31 July 2008)
  34. ECSS-E-ST-32C Rev.1 – Structural general requirements (15 November 2008)
  35. ECSS-E-ST-33-01C Rev.2 – Mechanisms (1 March 2019)
  36. ECSS-E-ST-33-11C Rev.1 – Explosive subsystems and devices (1 June 2017)
  37. ECSS-E-ST-34C – Environmantal control and life support (ECLS) (31 July 2008)
  38. ECSS-E-ST-35-01C – Liquid and electric propulsion for spacecraft (15 November 2008)
  39. ECSS-E-ST-35-02C – Solid propulsion for spacecrafts and launchers (8 October 2010)
  40. ECSS-E-ST-35-03C – Liquid propulsion for launchers (13 May 2011)
  41. ECSS-E-ST-35-06C Rev.2 – Cleanliness requirements for spacecraft propulsion hardware (7 April 2020)
  42. ECSS-E-ST-35-10C – Compatibility testing for liquid propulsion systems (6 March 2009)
  43. ECSS-E-ST-35C Rev.1 – Propulsion general requirements (6 March 2009)
  44. ECSS-E-ST-40-07C – Simulation modelling platform (2 March 2020)
  45. ECSS-E-ST-40C – Software (6 March 2009)
  46. ECSS-E-ST-50-02C – Ranging and Doppler tracking (31 July 2008)
  47. ECSS-E-ST-50-05C Rev.2 – Radio frequency and modulation (4 October 2011)
  48. ECSS-E-ST-50-11C – SpaceFibre – Very high-speed serial link (15 May 2019)
  49. ECSS-E-ST-50-12C Rev.1 – SpaceWire – Links, nodes, routers and networks (15 May 2019)
  50. ECSS-E-ST-50-13C – Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft (15 November 2008)
  51. ECSS-E-ST-50-14C – Spacecraft discrete interfaces (31 July 2008)
  52. ECSS-E-ST-50-15C – CANbus extension protocol (1 May 2015)
  53. ECSS-E-ST-50-16C – Space engineering – Time-Triggered Ethernet (30 September 2021)
  54. ECSS-E-ST-50-51C – SpaceWire protocol identification (5 February 2010)
  55. ECSS-E-ST-50-52C – SpaceWire – Remote memory access protocol (5 February 2010)
  56. ECSS-E-ST-50-53C – SpaceWire – CCSDS packet transfer protocol (5 February 2010)
  57. ECSS-E-ST-50C Rev.1 – Communications (1 March 2021)
  58. ECSS-E-ST-60-10C – Control performance (15 November 2008)
  59. ECSS-E-ST-60-20C Rev.2 – Star sensor terminology and performance specification (15 May 2019)
  60. ECSS-E-ST-60-21C – Gyro terminology and performance specification (15 February 2017)
  61. ECSS-E-ST-60-30C: Satellite attitude and orbit control system (AOCS) requirements (30 August 2013)
  62. ECSS-E-ST-70-01C – Spacecraft on-board control procedures (16 April 2010)
  63. ECSS-E-ST-70-11C – Space segment operability (31 July 2008)
  64. ECSS-E-ST-70-31C – Ground systems and operations – Monitoring and control data definition (31 July 2008)
  65. ECSS-E-ST-70-32C – Test and operations procedure language (31 July 2008)
  66. ECSS-E-ST-70-41C – Telemetry and telecommand packet utilization (15 April 2016)
  67. ECSS-E-ST-70C – Ground systems and operations (31 July 2008)
  68. ECSS-M-70A – Integrated logistic support (19 April 1996)
  69. ECSS-M-ST-10-01C – Organization and conduct of reviews (15 November 2008)
  70. ECSS-M-ST-10C Rev.1 – Project planning and implementation (6 March 2009)
  71. ECSS-M-ST-40C Rev.1 – Configuration and information management (6 March 2009)
  72. ECSS-M-ST-60C – Cost and schedule management (31 July 2008)
  73. ECSS-M-ST-80C – Risk management (31 July 2008)
  74. ECSS-P-00C – Standardization objectives, policies and organization (22 March 2013)
  75. ECSS-Q-ST-10-04C – Critial-item control (31 July 2008)
  76. ECSS-Q-ST-10-09C Rev.1 – Nonconformance control system (1 March 2018)
  77. ECSS-Q-ST-10C Rev.1 – Product assurance management (15 March 2016)
  78. ECSS-Q-ST-20-07C – Quality and safety assurance for space test centres (1 October 2014)
  79. ECSS-Q-ST-20-08C – Storage, handling and transportation of spacecraft hardware (1 October 2014)
  80. ECSS-Q-ST-20-10C – Off-the-shelf items utilization in space systems (8 October2010)
  81. ECSS-Q-ST-20C Rev.2 – Quality assurance (1 February 2018)
  82. ECSS-Q-ST-30-02C – Failure modes, effects (and criticality) analysis (FMEA/FMECA) – (6 March 2009)
  83. ECSS-Q-ST-30-09C – Availability analysis (31 July 2008)
  84. ECSS-Q-ST-30-11C Rev.2: Derating – EEE components (23 June 2021)
  85. ECSS-Q-ST-30C Rev.1 – Dependability (15 February 2017)
  86. ECSS-Q-ST-40-02C – Hazard analysis (15 November 2008)
  87. ECSS-Q-ST-40-12C – Fault tree analysis – Adoption notice ECSS/IEC 61025 (31 July 2008)
  88. ECSS-Q-ST-40C Rev.1 – Safety (15 February 2017)
  89. ECSS-Q-ST-60-03C – ASIC, FPGA and IP Core product assurance (11 October 2023)
  90. ECSS-Q-ST-60-05C Rev.1 – Generic procurement requirements for hybrids (6 March 2009)
  91. ECSS-Q-ST-60-12C – Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs) – (31 July 2008)
  92. ECSS-Q-ST-60-13C Rev.1 – Commercial electrical, electronic and electromechanical (EEE) components (12 May 2022)
  93. ECSS-Q-ST-60-14C Rev.1 Corrigendum 1 – Relifing procedure – EEE components (2 March 2020)
  94. ECSS-Q-ST-60-15C – Radiation hardness assurance – EEE components (1 October 2012)
  95. ECSS-Q-ST-60C Rev.3 – Electrical, electronic and electromechanical (EEE) components (12 May 2022)
  96. ECSS-Q-ST-70-01C – Cleanliness and contamination control (15 November 2008)
  97. ECSS-Q-ST-70-02C – Thermal vacuum outgassing test for the screening of space materials (15 November 2008)
  98. ECSS-Q-ST-70-03C – Black-anodizing of metals with inorganic dyes (31 July 2008)
  99. ECSS-Q-ST-70-04C – Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies (15 November 2008)
  100. ECSS-Q-ST-70-05C Rev.1 – Detection of organic contamination surfaces by IR spectroscopy (15 October 2019)
  101. ECSS-Q-ST-70-06C – Particle and UV radiation testing for space materials (31 July 2008)
  102. ECSS-Q-ST-70-09C – Measurements of thermo-optical properties of thermal control materials (31 July 2008)
  103. ECSS-Q-ST-70-12C – Design rules for printed circuit boards (14 July 2014)
  104. ECSS-Q-ST-70-13C Rev.1: Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes (5 Oct 2011)
  105. ECSS-Q-ST-70-14C – Corrosion (1 November 2016)
  106. ECSS-Q-ST-70-15C – Non-destructive testing (1 May 2021)
  107. ECSS-Q-ST-70-16C: Adhesive bonding for spacecraft and launcher applications (1 December 2020)
  108. ECSS-Q-ST-70-17C – Durability testing of coatings (1 February 2018)
  109. ECSS-Q-ST-70-18C – Preparation, assembly and mounting of RF coaxial cables (15 November 2008)
  110. ECSS-Q-ST-70-20C – Determination of the susceptibility of silver-plated copper wire and cable to “red-plague” corrosion (31 July 2008)
  111. ECSS-Q-ST-70-21C – Flammability testing for the screening of space materials (5 February 2010)
  112. ECSS-Q-ST-70-22C – Control of limited shelf-life materials (31 July 2008)
  113. ECSS-Q-ST-70-26C Rev.1 Corr.1 – Crimping of high-reliability electrical connections (1June2017)
  114. ECSS-Q-ST-70-28C – Repair and modification of printed circuit board assemblies for space use (31 July 2008)
  115. ECSS-Q-ST-70-29C – Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment (15 November 2008)
  116. ECSS-Q-ST-70-30C – Wire wrapping of high-reliability electrical connections (31 July 2008)
  117. ECSS-Q-ST-70-31C Rev.1 – Application of paints on space hardware (15 October 2019)
  118. ECSS-Q-ST-70-36C – Material selection for controlling stress-corrosion cracking (6 March 2009)
  119. ECSS-Q-ST-70-37C – Determination of the susceptibility of metals to stress-corrosion cracking (15 November 2008)
  120. ECSS-Q-ST-70-39C – Welding of metallic materials for flight hardware (1 May 2015)
  121. ECSS-Q-ST-70-40C – Processing and quality assurance requirements for brazing of flight hardware (8 April 2022)
  122. ECSS-Q-ST-70-45C – Mechanical testing of metallic materials (31 July 2008)
  123. ECSS-Q-ST-70-46C Rev.1 – Requirements for manufacturing and procurement of threaded fasteners (6 March 2009)
  124. ECSS-Q-ST-70-50C – Particles contamination monitoring for spacecraft systems and cleanrooms (4 October 2011)
  125. ECSS-Q-ST-70-53C – Materials and hardware compatibility tests for sterilization processes (15 November 2008)
  126. ECSS-Q-ST-70-54C – Ultracleaning of flight hardware (15 February 2017)
  127. ECSS-Q-ST-70-55C – Microbial examination of flight hardware and cleanrooms (15 November 2008)
  128. ECSS-Q-ST-70-56C – Vapour phase bioburden reduction for flight hardware (30 August 2013)
  129. ECSS-Q-ST-70-57C: Dry heat bioburden reduction for flight hardware (30 August 2013)
  130. ECSS-Q-ST-70-58C – Bioburden control of cleanrooms (15 November 2008)
  131. ECSS-Q-ST-70-60C Corrigendum 1 – Qualification and procurement of printed circuit boards (1 March 2019)
  132. ECSS-Q-ST-70-61C – High reliability assembly for surface mount and through hole connections (8 April 2022)
  133. ECSS-Q-ST-70-71C Rev.1 – Materials, processes and their data selection (15 October 2019)
  134. ECSS-Q-ST-70-80C – Processing and quality assurance requirements for metallic powder bed fusion technologies for space applications (30 July 2021)
  135. ECSS-Q-ST-70C Rev.2 – Materials, mechanical parts and processes (15 October 2019)
  136. ECSS-Q-ST-80C Rev.1 – Software product assurance (15 February 2017)
  137. ECSS-S-ST-00-01C Rev.1 – Glossary of terms (11 October 2023)
  138. ECSS-S-ST-00-02C Draft 1 “Tailoring” (15 June 2020)
  139. ECSS-S-ST-00C Rev.1 “Description, implementation and general requirement” (15 June 2020)
  140. ECSS-U-AS-10C Rev.2 – Adoption Notice of ISO 24113: Space systems – Space debris mitigation requirements (9 February 2024)
  141. ECSS-U-ST-20C – Space sustainability – Planetary protection (1 August 2019)